Intellivision:Yannick RGB Mod

From ConsoleMods Wiki
Revision as of 03:35, 13 December 2022 by Derf (talk | contribs) (Created page with " == Version 2 Correction == In some cases after installing the Yannick RGB mod, you may see that a top portion of the screen is misaligned or "flagging" as shown in the image below. : 300px If this is the case with your install, you can fix this by cutting a trace and bridging one side of the trace to ground on the bottom of the RGB board as described below. # Cut the trace marked with red on the bottom side: <br> File:Yan...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search



Version 2 Correction

In some cases after installing the Yannick RGB mod, you may see that a top portion of the screen is misaligned or "flagging" as shown in the image below.

Yannick RGB Sync Flagging.png

If this is the case with your install, you can fix this by cutting a trace and bridging one side of the trace to ground on the bottom of the RGB board as described below.

  1. Cut the trace marked with red on the bottom side:
    Yannick RGB Sync Correction 1.jpg
  2. Scratch the solder mask to reveal copper on both the trace and the ground plane:
    Yannick RGB Sync Correction 2.jpg
  3. Put a solder blob across the trace and ground plane to connect them:
    Yannick RGB Sync Correction 3.jpg
Retrieved from "https://consolemods.org/wiki/index.php?title=Intellivision:Yannick_RGB_Mod&oldid=19996"