PSP:Connector Pinouts: Difference between revisions

From ConsoleMods Wiki
Jump to navigation Jump to search
(Created page with "== Micro USB Port (All Models except N1000) == {| class="wikitable" !Pin !Name !Cable color !Description |- |1 |VCC |Red | +5 VDC |- |2 |D- |White |Data - |- |3 |D+ |Green |Data + |- |x | colspan="3" |Unused |- |4 |GND |Black |Ground |} == PSP Go (N1000) USB Port == {| class="wikitable" !Pin !Name !Description |- |1 |GND | |- |2 |ACCESSORY_USB_SUPPLY_3V3 |Used on N440 Converter Cable Adapter to power USB accessories |- |3 |EXTERNAL_MIC_IN | |- |4 |POMMEL BALL M1 | |- |5...")
 
Line 1: Line 1:
== Micro USB Port (All Models except N1000) ==
== Mini USB Port (All Models except N1000) ==
{| class="wikitable"
{| class="wikitable"
!Pin
!Pin

Revision as of 01:49, 30 November 2023

Mini USB Port (All Models except N1000)

Pin Name Cable color Description
1 VCC Red +5 VDC
2 D- White Data -
3 D+ Green Data +
x Unused
4 GND Black Ground

PSP Go (N1000) USB Port

Pin Name Description
1 GND
2 ACCESSORY_USB_SUPPLY_3V3 Used on N440 Converter Cable Adapter to power USB accessories
3 EXTERNAL_MIC_IN
4 POMMEL BALL M1
5 AUD_L
6 Backlight IC ball C1
7 GND
8 AUD_R
9 GND
10 ENABLE_AUDIO_MULTIOUT
11 GND
12 GND
13 Pr / COMPOSITE_VIDEO
14 CABLE_TYPE_SENSE_1 Used in jigkick as TX
15 CABLE_TYPE_SENSE_2
16 Y / S-VIDEO_Y
17 Backlight IC ball D4 Used in jigkick as RX
18 Backlight IC ball B2
19 Cb / S-VIDEO_C
20 DET_5V_CRADLE Apply +5v through 10kOhm resistor to enable pin 22
21 DET_USB_CABLE_CONNECTED
22 5V_INPUT Apply +5v when enabled to charge battery or power board if no battery
23 Backlight IC ball A6
24 SYSCON_TOH0 Ground while powered off to enable jigkick
25 GND
26 USB_D+
27 USB_D-
28 GND

Memory Stick (Original)

1 VSS Vss
2 BS Bus state signal
3 DATA1 Data1 Parallel / NC Serial
4 SDIO/DATA0 Data0 Parallel / Data Serial
5 DATA2 Data2 Parallel / NC Serial
6 INS Stick detect (connected to VSS)
7 DATA3 Data3 Parallel / NC Serial
8 SCLK Clock signal
9 VCC Vcc (2,7V - 3,6V)
10 VSS Vss

Memory Stick (M2)

1 BS Bus state signal
2 DATA1 Data1 Parallel / NC Serial
3 DATA0 Data0 Parallel / Data Serial
4 DATA2 Data2 Parallel / NC Serial
5 INS Stick detect (connected to VSS)
6 DATA3 Data3 Parallel / NC Serial
7 SCLK Clock signal
8 VCC Vcc (2,7V - 3,6V)
9 VSS Vss
10 Reserved
11 Reserved