Search results

===General Information=== ===Technical Information===

This page shows you how to display ''any'' 640x480 VGA source on your RGB monitor, utilizing an Extron Emotia (exact compatible mo ...uld be available via the links on your right, but please double check your VGA source before buying, just to be safe. <br>[[File:VGAtoRGB02.jpg]]

...bPr component, S-Video, composite, and RF. Through a mod, you can also tap VGA output from the PS2 motherboard. [http://www.dansprojects.com/ps2sync.html ...ur setup is 100% RGB SCART, it might be functionally easier to use a SCART cable.

...to watch television on the Game Gear, as well as a Gear to Gear Cable (VS Cable) which allowed for multiplayer gameplay using two Game Gears. ===General Information===

===General Information=== ===Technical Information===

More information and downloads can be found on the official product pages for the [http://ww Both Rxi's have a DSUB (VGA-style) input. In order to connect your retro gaming consoles, you have a fe

...Accessories sells custom cables for the Toro, including an 8-pin Mini DIN cable that connects directly to the XRGB Mini Framemeister]. * Switchable between RGB and VGA output, like their [http://www.beharbros.com/#!kuro/c1dcu Kuro].

...: This Sega-specific board connects to the Xboxboard. It converts video to VGA and has USB controllers for handling gamepads. ...to a standard desktop ATX power supply. A video over how to wire up such a cable can be found on the [https://www.youtube.com/watch?v=ush3R3p1xoQ Video Game

...ulated signal in the UHF band usually incoming from an antenna or long run cable. This signal contains modulated composite video and mono/stereo audio. It d ...or to handle RF input. The most common connector is the F-type (coax, like cable TV). Much older televisions (early 1980s and earlier) usually have two scre

...monitor that requires TTL sync.  Do not use them if you're connecting the cable to a SCART receiving device!}} ..._Output|75 Ohm CSYNC Output section at the bottom of this page]]. For more information on sync, see the [[Types of Sync]] page.

* Inputs: SCART, Component and VGA. * Supported Signals All inputs support RGBs, YPbPr and RGsB. VGA also supports RGBHV.

...ng the Xbox to unlock the hard drive, "hotswapping" it by plugging its IDE cable into your PC while it is running, and modifying the files on the hard drive ...el and dashboard version by going to the dashboard, then Settings → System Information. The block of text will scroll down and reveal a value marked "K" for kerne

...drive with an IDE to SATA adapter '''but it requires a 24 inch 80-wire IDE cable'''. The hard drive must support locking - which all SATA drives do - unless ...w IDE hard drive or SATA hard drive using a SATA adapter and an 80-pin IDE cable. If you have an installer disc (Rocky's, Hexen, AID, Slayers) disc inserted

For general information about the RT4K, please visit [[AV:RetroTINK-4K|this page]]. ...ct of a video cable (like Composite) and a CRT. The idea is that the video cable and display blend the dither patterns together, to accomplish tricks like t

=== How can I learn more technical information about CRTs? === ...h you can get diagnostic information from your Sony devices using a serial cable and the BZI-500 (or BZI-501) software on a Windows 95 / NT4 based PC.

Please note that this information is only applicable to early versions of the RetroTINK-5X Pro and is provide ...unction and/or video noise. It is also important to use a good quality USB cable. Poorly manufactured cables drop voltage under high currents, which may res

This page serves as a reference for information on each version of the Xbox 360. All of the recommendations are objective w ...els. '''See the [[Xbox_360:Getting_Started|Getting Started]] page for more information.'''

#Connect the RetroTINK-5X Pro to your display using an HDMI cable. ...RetroTINK-5X Pro using a [[AV:RetroTINK-5X_Pro#Supported_Inputs|supported cable]].

** HD15/VGA: RGBHV, RGBS, RGsB, YPbPr, S-video and Composite # '''USB-C Power''' - Connect a USB-C cable supplying at least 5V/2A to the USB-C power input on the 4K.