Xbox 360:4GB NAND: Difference between revisions
Jump to navigation
Jump to search
(The pros/cons page on the main RGH page should be enough for someone to determine a recommendation) |
m (Text replacement - "Category:Xbox360" to "Category:Xbox 360") |
||
(8 intermediate revisions by one other user not shown) | |||
Line 1: | Line 1: | ||
[[Category: | [[Category:Xbox 360]] | ||
{{Note|Reading Corona NANDs with an SD tool can often be inconsistant across multiple console motherboards and card readers, even with the same SD tool and same card reader model. It is recommended to use a USB tool like the xFlasher360, Element's 4GB USB tool, or PicoFlasher.}} | {{Note|Reading Corona NANDs with an SD tool can often be inconsistant across multiple console motherboards and card readers, even with the same SD tool and same card reader model. It is recommended to use a USB tool like the xFlasher360, Element's 4GB USB tool, or PicoFlasher.}} | ||
This guide will walk you through obtaining NAND dumps, creating a | This guide will walk you through obtaining NAND dumps, creating a XeLL .ecc file, and writing it to the console using a SD card read/write kit or dedicated NAND flasher. | ||
'''This guide is ''only'' compatible with 4GB NAND Corona motherboards.''' You can view the guide for other NAND types [[Xbox_360:Standard_NAND|here]]. | '''This guide is ''only'' compatible with 4GB NAND Corona motherboards.''' You can view the guide for other NAND types [[Xbox_360:Standard_NAND|here]]. | ||
Line 7: | Line 7: | ||
==Equipment Needed== | ==Equipment Needed== | ||
*A PC running Windows Vista or later | *A PC running Windows Vista or later | ||
*A soldering iron, solder, and | *A soldering iron, solder, flux, and Isopropyl alcohol with cotton swabs | ||
** [[Recommended Soldering Equipment|Specific recommendatons can be found on this page]] | |||
*[https://github.com/Octal450/J-Runner-with-Extras/releases/latest J-Runner with Extras] | *[https://github.com/Octal450/J-Runner-with-Extras/releases/latest J-Runner with Extras] | ||
*One of the following: | *One of the following: | ||
** | **xFlasher360 by Element18592 | ||
**Raspberry Pi Pico (or other RP2040 based board) flashed with [[Xbox 360:PicoFlasher|PicoFlasher]] | **Raspberry Pi Pico (or other RP2040 based board) flashed with [[Xbox 360:PicoFlasher|PicoFlasher]] | ||
** | **4GB USB Tool by Element18592 | ||
**[https://themodshop.co/shop/sd-tool.html SD Tool 2.2 by Element18592] | **[https://themodshop.co/shop/sd-tool.html SD Tool 2.2 by Element18592] | ||
**Maximus SD Tool for 4GB Corona Nand Kit | **Maximus SD Tool for 4GB Corona Nand Kit | ||
**Xecuter Corona 4GB NAND RW Kit V4 | **Xecuter Corona 4GB NAND RW Kit V4 | ||
**Your own DIY R/W cable made with a microSD to SD card adapter | **[[Xbox 360:4GB NAND#DIY SD Card Tool|Your own DIY R/W cable made with a microSD to SD card adapter]] | ||
*A [https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2380057.m570.l1313&_nkw=smoke+usb+card+reader&_sacat=0 supported SD card reader] if you are using an SD tool | *A [https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2380057.m570.l1313&_nkw=smoke+usb+card+reader&_sacat=0 supported SD card reader] if you are using an SD tool | ||
*Micro-USB cable if using a Raspberry Pi with PicoFlasher | |||
*USB-C cable if using an newer xFlasher 360 or USB-C RP2040 SBC with PicoFlasher | |||
== NAND Flasher Comparison == | |||
{| class="wikitable" | |||
!Device | |||
!Pros | |||
!Cons | |||
|- | |||
|'''[[Xbox_360:XFlasher_360|xFlasher 360]]''' | |||
| | |||
* Reads NAND fast in 40 seconds to 4 minutes | |||
*Can also program glitch chips | |||
*Actively supported | |||
*USB-C | |||
| | |||
* More expensive than SD Card tools or PicoFlasher | |||
|- | |||
|'''[[Xbox 360:PicoFlasher|PicoFlasher]]''' | |||
| | |||
*Reads NAND in 1-8 minutes | |||
*Super cheap | |||
*Easy to find | |||
| | |||
*You will need a programmer to flash glitch chips | |||
|- | |||
|'''[https://themodshop.co/shop/usb-tool.html 4GB USB Tool]''' | |||
| | |||
*Reads NAND fast in 40 seconds to 4 minutes (same as xFlasher) | |||
*Cheap | |||
*Comes with a header for the NAND pads, making future NAND reading easier | |||
| | |||
*You will need a programmer to flash glitch chips | |||
|- | |||
|'''SD Card Tool (any brand)''' | |||
| | |||
*Super cheap | |||
*Easy to find | |||
| | |||
*You will need a programmer to flash glitch chips | |||
*Sometimes has spotty compatibility with SD card readers | |||
|} | |||
==Soldering to the Motherboard== | ==Soldering to the Motherboard== | ||
Line 34: | Line 75: | ||
=== DIY SD Card Tool === | === DIY SD Card Tool === | ||
[[File:VeWvR.jpg|700x700px]] | [[File:VeWvR.jpg|700x700px]] | ||
==Reading the NAND with J-Runner== | ==Reading the NAND with J-Runner== | ||
Line 45: | Line 81: | ||
#With your Xbox 360 powered off and the card reader or USB tool plugged into a PC, insert the SD card into the reader. Plug your Xbox 360 power supply in, but '''do not turn it on'''. | #With your Xbox 360 powered off and the card reader or USB tool plugged into a PC, insert the SD card into the reader. Plug your Xbox 360 power supply in, but '''do not turn it on'''. | ||
#*If you are using an xFlasher, set the switch to <code>eMMC</code>. | #*If you are using an xFlasher, set the switch to <code>eMMC</code>. | ||
# Launch J-Runner, and in the top right, click the | # Launch J-Runner, and in the top right, click the <code>NAND Type</code> button and select <code>Corona 4GB</code> and OK. | ||
#In J-Runner, select | #In J-Runner, select <code>Read Nand</code> in the top left. A pane will open in the lower right, listing some removable drives. If everything is wired properly, one will show up as Removable Media. | ||
#*If you don’t see it, see the troubleshooting steps at the bottom of this page. Select the drive and click "Read". It will read your NAND twice and automatically compare the dumps. When it has finished, it will tell you if the two dumps are an exact match. If they aren’t, take more dumps until you get matching ones. | #*If you don’t see it, see the troubleshooting steps at the bottom of this page. Select the drive and click "Read". It will read your NAND twice and automatically compare the dumps. When it has finished, it will tell you if the two dumps are an exact match. If they aren’t, take more dumps until you get matching ones. | ||
#Copy one of the dumps to a safe place such as cloud storage or send it to yourself in an email to keep it safe. They are located in the output folder. | #Copy one of the dumps to a safe place such as cloud storage or send it to yourself in an email to keep it safe. They are located in the output folder. | ||
== Writing the NAND with J-Runner== | == Writing XeLL to the NAND with J-Runner== | ||
[[File:Wb2k.jpg|thumb|Windbond Xbox 360 E RAM]] | [[File:Wb2k.jpg|thumb|Windbond Xbox 360 E RAM]] | ||
#With your Xbox 360 powered off and the card reader plugged into a PC, insert the SD card into the reader. Plug your Xbox 360 power supply in, but '''do not turn it on'''. | #With your Xbox 360 powered off and the card reader plugged into a PC, insert the SD card into the reader. Plug your Xbox 360 power supply in, but '''do not turn it on'''. | ||
# Launch J-Runner, and in the top right, click the "NAND Type" button and select "Corona 4GB" and OK. | # Launch J-Runner, and in the top right, click the "NAND Type" button and select "Corona 4GB" and OK. | ||
# Select "…" next to the Load Source field and choose your <code>nanddump1.bin</code>. In the top right of the window, select the latest the dashboard version in the dropdown menu next to "Dash Version". | # Select "…" next to the Load Source field and choose your <code>nanddump1.bin</code> or <code>nanddump2.bin</code>. In the top right of the window, select the latest the dashboard version in the dropdown menu next to "Dash Version". | ||
#*If you want to add a dashboard, extract it to the XeBuild folder inside your J-Runner directory, and restart J-Runner. | #*If you want to add a dashboard, extract it to the XeBuild folder inside your J-Runner directory, and restart J-Runner. | ||
# Select the appropriate <code>Glitch</code> radio button in the top right of the window: | # Select the appropriate <code>Glitch</code> radio button in the top right of the window: | ||
#* <code>Glitch2</code> - For RGH1.2, RGH2, RGH3, and S-RGH | #* <code>Glitch2</code> - For RGH1.2, RGH2, RGH3, Muffin/Mufas, and S-RGH | ||
#*<code>Glitch2m</code> - Same as Glitch2 but only used if your eFuses are in a non-bootable state. | #*<code>Glitch2m</code> - Same as Glitch2 but only used if your eFuses are in a non-bootable state. | ||
#Put a check in the appropriate check box (if applicable) in the top right of the window. | #Put a check in the appropriate check box (if applicable) in the top right of the window. | ||
#*If you are using RGH 1.2 or S-RGH, toggle '''SMC+''' | #*If you are using RGH 1.2 or S-RGH, toggle '''SMC+''' | ||
#*If you are using Project Mufas, select '''SMC+''' | |||
#*If you are using RGH2 with a X360ACE, use '''SMC+''' | #*If you are using RGH2 with a X360ACE, use '''SMC+''' | ||
#*If you are using RGH2 or RGH2+ with a CR3/CR4, toggle '''CR4''' | #*If you are using RGH2 or RGH2+ with a CR3/CR4, toggle '''CR4''' | ||
#* If you are using RGH3, toggle '''RGH3''' | #* If you are using RGH3, toggle '''RGH3''' | ||
#*If you have an Xbox 360 E motherboard with Windbond branded RAM, toggle '''WB 2K'''. [[Xbox_360:4GB_NAND#/media/File:Wb2k.jpg|(Example)]] | #*If you have an Xbox 360 E motherboard with Windbond branded RAM, toggle '''WB 2K'''. [[Xbox_360:4GB_NAND#/media/File:Wb2k.jpg|(Example)]] | ||
#Select the | #Select the <code>Create XeLL</code> button and wait for it to finish. | ||
#Select the | #Select the <code>Write XeLL</code> button, select your system, and press OK. A pane will open in the lower right, listing some removable drives. If everything is wired properly, one will show up as Removable Media. | ||
#* If you don’t see it, see the troubleshooting steps at the bottom of this page. | #* If you don’t see it, see the troubleshooting steps at the bottom of this page. | ||
#Select the drive and click "Write". J-Runner will write the modified NAND dump to the motherboard. | #Select the drive and click "Write". J-Runner will write the modified NAND dump to the motherboard. | ||
#Once it has successfully written to the motherboard, unplug the power cable from your Xbox 360 and unplug the USB cable from the computer and programmer. | #Once it has successfully written to the motherboard, unplug the power cable from your Xbox 360 and unplug the USB cable from the computer and programmer. | ||
# | #Proceed to your desired RGH method in the [[Xbox_360:RGH#RGH_Wiring|RGH Wiring section]]. | ||
#*[[Xbox_360:RGH/RGH1.2|RGH1.2]] | |||
#*[[Xbox_360:RGH/RGH2|RGH2]] | |||
#*[[Xbox_360:RGH/S-RGH|S-RGH]] | |||
#*[[Xbox 360:RGH/Mufas|Project Mufas]] | |||
#*[[Xbox_360:RGH/RGH3|RGH3]] | |||
==Troubleshooting == | ==Troubleshooting == |
Latest revision as of 20:23, 4 September 2024
Reading Corona NANDs with an SD tool can often be inconsistant across multiple console motherboards and card readers, even with the same SD tool and same card reader model. It is recommended to use a USB tool like the xFlasher360, Element's 4GB USB tool, or PicoFlasher. |
This guide will walk you through obtaining NAND dumps, creating a XeLL .ecc file, and writing it to the console using a SD card read/write kit or dedicated NAND flasher.
This guide is only compatible with 4GB NAND Corona motherboards. You can view the guide for other NAND types here.
Equipment Needed
- A PC running Windows Vista or later
- A soldering iron, solder, flux, and Isopropyl alcohol with cotton swabs
- J-Runner with Extras
- One of the following:
- xFlasher360 by Element18592
- Raspberry Pi Pico (or other RP2040 based board) flashed with PicoFlasher
- 4GB USB Tool by Element18592
- SD Tool 2.2 by Element18592
- Maximus SD Tool for 4GB Corona Nand Kit
- Xecuter Corona 4GB NAND RW Kit V4
- Your own DIY R/W cable made with a microSD to SD card adapter
- A supported SD card reader if you are using an SD tool
- Micro-USB cable if using a Raspberry Pi with PicoFlasher
- USB-C cable if using an newer xFlasher 360 or USB-C RP2040 SBC with PicoFlasher
NAND Flasher Comparison
Device | Pros | Cons |
---|---|---|
xFlasher 360 |
|
|
PicoFlasher |
|
|
4GB USB Tool |
|
|
SD Card Tool (any brand) |
|
|
Soldering to the Motherboard
xFlasher 360
Picoflasher
SD Tool 2.2 or 4GB USB Tool
Team Xecuter Corona SD Card R/W kit
Maximus SD Tool
Manual (Only pages 1-4 are needed, as they show what needs to be soldered)
DIY SD Card Tool
Reading the NAND with J-Runner
- Extract J-Runner with Extras.
- With your Xbox 360 powered off and the card reader or USB tool plugged into a PC, insert the SD card into the reader. Plug your Xbox 360 power supply in, but do not turn it on.
- If you are using an xFlasher, set the switch to
eMMC
.
- If you are using an xFlasher, set the switch to
- Launch J-Runner, and in the top right, click the
NAND Type
button and selectCorona 4GB
and OK. - In J-Runner, select
Read Nand
in the top left. A pane will open in the lower right, listing some removable drives. If everything is wired properly, one will show up as Removable Media.- If you don’t see it, see the troubleshooting steps at the bottom of this page. Select the drive and click "Read". It will read your NAND twice and automatically compare the dumps. When it has finished, it will tell you if the two dumps are an exact match. If they aren’t, take more dumps until you get matching ones.
- Copy one of the dumps to a safe place such as cloud storage or send it to yourself in an email to keep it safe. They are located in the output folder.
Writing XeLL to the NAND with J-Runner
- With your Xbox 360 powered off and the card reader plugged into a PC, insert the SD card into the reader. Plug your Xbox 360 power supply in, but do not turn it on.
- Launch J-Runner, and in the top right, click the "NAND Type" button and select "Corona 4GB" and OK.
- Select "…" next to the Load Source field and choose your
nanddump1.bin
ornanddump2.bin
. In the top right of the window, select the latest the dashboard version in the dropdown menu next to "Dash Version".- If you want to add a dashboard, extract it to the XeBuild folder inside your J-Runner directory, and restart J-Runner.
- Select the appropriate
Glitch
radio button in the top right of the window:Glitch2
- For RGH1.2, RGH2, RGH3, Muffin/Mufas, and S-RGHGlitch2m
- Same as Glitch2 but only used if your eFuses are in a non-bootable state.
- Put a check in the appropriate check box (if applicable) in the top right of the window.
- If you are using RGH 1.2 or S-RGH, toggle SMC+
- If you are using Project Mufas, select SMC+
- If you are using RGH2 with a X360ACE, use SMC+
- If you are using RGH2 or RGH2+ with a CR3/CR4, toggle CR4
- If you are using RGH3, toggle RGH3
- If you have an Xbox 360 E motherboard with Windbond branded RAM, toggle WB 2K. (Example)
- Select the
Create XeLL
button and wait for it to finish. - Select the
Write XeLL
button, select your system, and press OK. A pane will open in the lower right, listing some removable drives. If everything is wired properly, one will show up as Removable Media.- If you don’t see it, see the troubleshooting steps at the bottom of this page.
- Select the drive and click "Write". J-Runner will write the modified NAND dump to the motherboard.
- Once it has successfully written to the motherboard, unplug the power cable from your Xbox 360 and unplug the USB cable from the computer and programmer.
- Proceed to your desired RGH method in the RGH Wiring section.
Troubleshooting
- Console does not show up in the list of devices
- Check soldering
- Make sure you insert the SD card tool before powering the Xbox
- If possible, try a different card reader
- Make sure the crystal is grounded properly
- What should I do if I ripped off a soldering pad?
- Look online for an alternate point to solder on to. Practice more on junk electronics before attempting to continue.