Xbox 360:Motherboard Information: Difference between revisions

From ConsoleMods Wiki
Jump to navigation Jump to search
m (Derf moved page Xbox 360:Xbox 360 Schematics to Xbox 360:Motherboard Information without leaving a redirect)
No edit summary
 
(37 intermediate revisions by 4 users not shown)
Line 1: Line 1:
== Xenon ==
[[Category:Xbox 360]]
== Xbox 360 (Original) ==


* [https://archive.org/details/Xbox_360_Xenon_schematics Xenon schematics]
=== Xenon ===
The motherboard used in beta XDKs and the finalized launch models. It has a 90 nm Waternoose CPU, 90 nm Y1 GPU, and 90 nm Edifis eDRAM. Commonly has leaky 16v 1500µF capacitors, leaky 6.3v capacitors, and unreliable GPUs. Some Xenons sent into Microsoft for RROD repair were either turned into an [[Xbox 360:Motherboard Information#Elpis|Elpis]] or received a revised 90 nm Y1 GPU with high Tg underfill, both of which had significantly improved reliability over the original 2005-2007 Y1 chips.
 
Retail Xenons came with a 16 MB NAND flash chip, whereas non-retail consoles came with a 64 MB NAND flash.
 
Part Number: '''X803600'''
 
===== Images =====
<div class="inline-images">
[[File:Xbox 360 Xenon Top.png|300px]] [[File:Xbox 360 Xenon Bottom.png|300px]]
 
 
 
 
</div>
 
==== [https://consolemods.org/wiki/images/c/cb/Xbox_360_Xenon_Schematic.pdf Schematics] ====
 
==== Boardviews ====
[https://consolemods.org/wiki/images/9/92/Xenon.brd Retail]
 
[https://consolemods.org/wiki/images/8/88/Xenon_008.brd Pre-Release 008 XDK]
 
==== Capactior Map ====
[[File:XenonCapMap.png|frameless|600x600px]]
 
=== Elpis ===
Officially referbished Xenon with an Elpis GPU, which essentially a Rhea modified to work with a Xenon. These boards are known to be reliable, but still suffer from the Xenon's capacitor problem. 
 
Part number is the same as the original Xenon. 
 
==== Images ====
<div class="inline-images">
[[File:JFT-XBOX360-Elpis-Top-20240121.png|300px]] [[File:JFT-XBOX360-Elpis-Bottom-20240121.png|300px]]
</div>
 
==== Schematics ====
Refer to the [[Xbox 360:Motherboard Information#Schematics|Xenon schematics]], as they are the same PCB.
 
==== Boardviews ====
Refer to the [[Xbox 360:Motherboard Information#Xenon (Final)|retail Xenon boardview]], as they are the same PCB.
 
=== Zephyr ===
Relatively significant motherboard redesign that made the motherboard much cheaper to manufacture while adding HDMI support. It first appeared in late 2006. The encoder/analog IC (Ana) and clock generator from the Xenon were integrated in a new HANA chip. NAND Flash configuration is the same as the Xenon. The Zephyr B/C also feature CPUs with newer stepping and revised Y2/Rhea GPUs respectively. The Zephyr_B's Y2 GPU still had the original eDRAM but with a shrunken GPU die due to manufacturing optmizations, whereas the Zephyr_C's Rhea GPU had a redesigned eDRAM codenamed Stryx. The Zephyr_B first appeared in early 2007, but the Zephyr_C shortly followed around mid-2007.
 
Zephyr_A Part Number: '''X810385'''
 
Zephyr_B/C Part Number: '''X810387'''
 
====Images====
Zephyr_C<div class="inline-images">
[[File:Xbox 360 Zephyr Top.png|300px]] [[File:Xbox 360 Zephyr Bottom.png|300px]]
 
 
</div>
 
====Schematics====
[https://consolemods.org/wiki/images/a/ae/Xbox_360_Zephyr_A_Schematic.pdf Retail Zephyr_A]
 
====Boardview====
[https://consolemods.org/wiki/images/6/68/Zephyr_A.brd Retail Zephyr_A (90 nm Y1 GPU)]
 
[https://consolemods.org/wiki/images/a/a4/Zephyr_B.brd Retail Zephyr_B/C (90 nm Y2 or Rhea GPU)]
===Falcon===
First motherboard to feature a 65 nm Loki CPU while being slightly further simplified, like having a cheaper power delivery system (CPU Core voltage is two phases instead of three, for example). It first appeared in late 2007 consoles. Mid to late 2008 Falcons also came with reliable Rhea GPUs (came with a higher Tg underfill) and 4x128MB RAM configurations instead of the previous 8x64MB. The reliable GPUs were standardized in consoles made or serviced around June of 2008. NAND Flash configurations are the same as the Xenon and Zephyr.
 
There are also versions of this board called "Opus". They are essentially just Falcons but used as motherboard replacements for referbished Xenons. As such, they don't have an HDMI port. In fact, the AV port on the Opus was only used for it and is different from the Xenon's AV connector.
 
Part number: '''X812320'''
 
====Images====
<div class="inline-images">
[[File:Xbox 360 Falcon Top.png|300px]] [[File:Xbox 360 Falcon Bottom.png|300px]]
</div>
 
====[https://consolemods.org/wiki/images/2/26/Xbox_360_Falcon_Schematic.pdf Schematics]====
 
====Boardviews====
[https://consolemods.org/wiki/images/e/e9/Falcon.brd Retail]
 
===Jasper===
First motherboard to shink the GPU to the 65 nm Zeus, matching with the CPU. It was first seen in late 2008 consoles. It came with an updated south bridge that supported "big block" 256 MB and 512 MB NAND flash chips with a built in user accessible memory unit, and those bigger flash chips were featured in the "Xbox 360 Arcade" retail configurations. Non-retail developer consoles with Jasper motherboards still used 64 MB NAND chips. Some Jasper motherboards produced in July 2009 also came with Kronos GPUs, which shrunk the eDRAM to also be 65 nm. Some of these motherboards also came with an updated CB bootloader that patched the SMC (or "JTAG") Hack.
 
Most of these motherboards are known to be reliable, but some may come with leaky 16v 1500 µF Sanyo capacitors.
 
Part Number: '''X815842'''
 
====Images====
<div class="inline-images">
[[File:Xbox 360 Jasper V1 Top.png|300px]] [[File:Xbox 360 Jasper V1 Bottom.png|300px]]
</div>
 
====[https://consolemods.org/wiki/images/2/26/Xbox_360_Falcon_Schematic.pdf Schematics]====
Includes "Panda" integrated memory unit, using an additional NAND + USB interface as opposed to the final Jasper solution combined with main NAND.
 
====Boardviews ====
[https://consolemods.org/wiki/images/f/f1/Jasper_V1_x815842-002_osp.brd Retail]
 
===Tonasket===
Also known as "Jasper Kronos" or by the GPU name, "Kronos". It was first spotted in late 2009 consoles. It is a minor PCB revision of the Jasper, but all of the GPUs on this board are the Kronos revision with a shrunken 65 nm Stryx eDRAM. All versions of this motherboard are also known to be reliable. NAND flash configurations on the Tonasket are the same as the Jasper, except for the 256 MB config not being used anymore. All of these motherboards are patched against the SMC Hack.
 
This motherboard is usually referred to as the most reliable revision.
 
Part Number: '''X820379'''
 
====Images====
<div class="inline-images">
[[File:Xbox 360 Jasper v2 (Kronos) Top.png|300px]] [[File:Xbox 360 Jasper v2 (Kronos) Bottom.png|300px]]
</div>
 
====[https://consolemods.org/wiki/images/f/f0/Xbox_360_Jasper_Tonasket_Schematic.pdf Schematics]====
====Boardviews ====
[https://consolemods.org/wiki/images/3/3e/Jasper_Kronos_Tonasket.brd Retail]
 
==Xbox 360 S==
 
===Trinity===
Significant motherboard redesign used for the launch models of the Xbox 360 S. It combines the CPU and GPU into one 45 nm die while still using the 65 nm Styx EDRAM. The name of the new combied chip was Vejle, while the codename before the chip was finalized was Valhalla. It has the same flash configs as the Jasper & Tonasket while also being decently reliable. Interestingly, non-retail Trinity consoles came with a "big block" 512 MB NAND instead of 64 MB. Retail 4 GB SKUs with this motherboard came with an internal 4 GB Memory Unit add-on.
 
Part Number: '''X820379'''
 
====Images====
Retail ''(factory-fitted HDD model - note the lack of MUPort connector in area D1, just above the NAND)''<div class="inline-images">
[[File:Xbox 360 Trinity Top.png|300px]] [[File:Xbox 360 Trinity Bottom.png|300px]]
</div>Unpopulated<div class="inline-images">
[[File:Xbox 360 Trinity Top (Unpopulated).png|300px]] [[File:Xbox 360 Trinity Bottom (Unpopulated).png|300px]]
</div>
 
====[https://consolemods.org/wiki/images/3/38/Xbox_360_Trinity_Schematic.pdf Schematics]====
 
====Boardviews====
[https://consolemods.org/wiki/images/d/df/Trinity_FabF_ver2.brd Debug/XDK Boardview]
 
While this isn't a boardview for Retail systems, it can still be referenced due to the layout being identical. The only major differences are that it's a six layer motherboard and the RAM has extra traces for 1 GB of memory.
 
===Corona===
Also known as "Corona V1 (16MB)" or "Corona V2 (4 GB)"
 
First appeared in mid-2011 S consoles. It has many similarities to Trinity, but slightly simplified with a new south bridge that can support on-board 4 GB NANDs. The new south bridge integrated the ethernet PHY and HANA IC into it. It is also reliable, aside from the 4 GB flash chips.
 
Part Number: '''X857330'''
 
4 GB Build-up: '''X859085'''
 
====Images====
 
Corona 4 GB ''(note the new NAND on the back, and the tiny BGA interface chip in area D1 where the original NAND would be)''
<div class="inline-images">[[File:Xbox_360_Corona_with_POST-OUT_Top.png|frameless|310x310px]][[File:Xbox_360_Corona_with_POST-OUT_Bottom.png|frameless|327x327px]]</div>
 
====Schematics====
[https://consolemods.org/wiki/images/3/32/Xbox_360_Corona_Schematic.pdf Corona PCB]
 
[https://consolemods.org/wiki/images/5/52/Xbox_360_Corona_Translation_Schematic.pdf Translation]
 
==== Boardviews ====
[https://consolemods.org/wiki/images/4/4a/Corona_V1_V2.brd Retail boardview]
 
===Waitsburg===
Also known as "Corona V3 (16MB)" or "Corona V4 (4 GB)"
 
First appeared in early 2012 S consoles. POST trace for the CPU has been removed. 4 GB versions of this board also came with a BGA eMMC intead of the Hynix TSOP NAND + Phison PS700 that was previously on the Corona. It's otherwise exactly the same as the Corona.
 
Part Number: '''X862605'''
 
====Images====
Waitsburg 16 MB ''(note TSOP chip in area D1, with the outline for the BGA eMMC barely visible under it)''<div class="inline-images">[[File:JFT-XBOX360S-Waitsburg-Top-20240121.png|frameless|312x312px]][[File:JFT-XBOX360S-Waitsburg-Bottom-20240121.png|frameless|318x318px]]</div>
 
====[https://consolemods.org/wiki/images/7/7b/Xbox_360_Corona_Waitsburg_Schematic.pdf Schematics]====
Since the Waitsburg is very similar to the Corona, you can refer to its schematics.
 
====[https://consolemods.org/wiki/images/4/47/Corona_V3_V4_X862605-002_waitsburg.brd Boardviews] ====
Retail Boardview
 
==Xbox 360 E==
 
===Stingray===
Also known as "Corona V5 (16MB)" or "Corona V6 (4 GB)"
 
Launch model Xbox 360 E motherboard. Very similar to Waitsburg but has a single barrel power supply connector and less rear I/O. The ICs for tilt detection and front panel button chimes are also removed, but the pads are still present. 
 
Part Number: '''X854326'''
 
==== Images ====
Stingray 4 GB<div class="inline-images">
[[File:Xbox 360 Corona Stingray Top.png|300px]] [[File:Xbox 360 Corona Stingray Bottom.png|300px]]
</div>
 
====[https://consolemods.org/wiki/File:Xbox_360_Corona_Stingray_Schematic.pdf Schematics]====
====[https://consolemods.org/wiki/images/b/b7/Corona_V5_V6_sterling_osp.brd Boardview]====
Retail boardview
 
===Winchester===
{{Note|No schematics or boardviews are currently available for this motherboard at the time of writing.}}Revised XCGPU and a vastly more simplified layout. The new Oban XCGPU integrated the eDRAM into the main die, shrunk the manufacturing process to 32 nm, and patched the "Reset Glitch Hack" by disabling many of the pins used for that exploit. This motherboard first appeared in Xbox 360 Es in late 2014, and is also very reliable.
 
Part Number: '''X879957'''
 
==== Images====
Winchester 4 GB<div class="inline-images">
[[File:Xbox 360 Winchester Top.png|300px]] [[File:Xbox 360 Winchester Bottom.png|300px]]
</div>
==Schematic Notes==
===USB lines===
<dt>Gameport</dt><dd>Front USB</dd>
<dt>Memport</dt><dd>Front USB (Memory Unit)</dd>
<dt>Expport</dt><dd>Rear USB (incl. Kinect)</dd>
<dt>Waveport</dt><dd>Xbox 360 S/E Wi-Fi card</dd>
<dt> MUport</dt><dd>Internal USB (Memory Unit for Trinity)</dd>
<dt> Argon </dt><dd>RF module for original models</dd>
<dt> Boron </dt><dd>RF module for Xbox 360 S models</dd>

Latest revision as of 18:58, 7 September 2024

Xbox 360 (Original)

Xenon

The motherboard used in beta XDKs and the finalized launch models. It has a 90 nm Waternoose CPU, 90 nm Y1 GPU, and 90 nm Edifis eDRAM. Commonly has leaky 16v 1500µF capacitors, leaky 6.3v capacitors, and unreliable GPUs. Some Xenons sent into Microsoft for RROD repair were either turned into an Elpis or received a revised 90 nm Y1 GPU with high Tg underfill, both of which had significantly improved reliability over the original 2005-2007 Y1 chips.

Retail Xenons came with a 16 MB NAND flash chip, whereas non-retail consoles came with a 64 MB NAND flash.

Part Number: X803600

Images

Xbox 360 Xenon Top.png Xbox 360 Xenon Bottom.png



Schematics

Boardviews

Retail

Pre-Release 008 XDK

Capactior Map

XenonCapMap.png

Elpis

Officially referbished Xenon with an Elpis GPU, which essentially a Rhea modified to work with a Xenon. These boards are known to be reliable, but still suffer from the Xenon's capacitor problem.

Part number is the same as the original Xenon.

Images

JFT-XBOX360-Elpis-Top-20240121.png JFT-XBOX360-Elpis-Bottom-20240121.png

Schematics

Refer to the Xenon schematics, as they are the same PCB.

Boardviews

Refer to the retail Xenon boardview, as they are the same PCB.

Zephyr

Relatively significant motherboard redesign that made the motherboard much cheaper to manufacture while adding HDMI support. It first appeared in late 2006. The encoder/analog IC (Ana) and clock generator from the Xenon were integrated in a new HANA chip. NAND Flash configuration is the same as the Xenon. The Zephyr B/C also feature CPUs with newer stepping and revised Y2/Rhea GPUs respectively. The Zephyr_B's Y2 GPU still had the original eDRAM but with a shrunken GPU die due to manufacturing optmizations, whereas the Zephyr_C's Rhea GPU had a redesigned eDRAM codenamed Stryx. The Zephyr_B first appeared in early 2007, but the Zephyr_C shortly followed around mid-2007.

Zephyr_A Part Number: X810385

Zephyr_B/C Part Number: X810387

Images

Zephyr_C

Xbox 360 Zephyr Top.png Xbox 360 Zephyr Bottom.png


Schematics

Retail Zephyr_A

Boardview

Retail Zephyr_A (90 nm Y1 GPU)

Retail Zephyr_B/C (90 nm Y2 or Rhea GPU)

Falcon

First motherboard to feature a 65 nm Loki CPU while being slightly further simplified, like having a cheaper power delivery system (CPU Core voltage is two phases instead of three, for example). It first appeared in late 2007 consoles. Mid to late 2008 Falcons also came with reliable Rhea GPUs (came with a higher Tg underfill) and 4x128MB RAM configurations instead of the previous 8x64MB. The reliable GPUs were standardized in consoles made or serviced around June of 2008. NAND Flash configurations are the same as the Xenon and Zephyr.

There are also versions of this board called "Opus". They are essentially just Falcons but used as motherboard replacements for referbished Xenons. As such, they don't have an HDMI port. In fact, the AV port on the Opus was only used for it and is different from the Xenon's AV connector.

Part number: X812320

Images

Xbox 360 Falcon Top.png Xbox 360 Falcon Bottom.png

Schematics

Boardviews

Retail

Jasper

First motherboard to shink the GPU to the 65 nm Zeus, matching with the CPU. It was first seen in late 2008 consoles. It came with an updated south bridge that supported "big block" 256 MB and 512 MB NAND flash chips with a built in user accessible memory unit, and those bigger flash chips were featured in the "Xbox 360 Arcade" retail configurations. Non-retail developer consoles with Jasper motherboards still used 64 MB NAND chips. Some Jasper motherboards produced in July 2009 also came with Kronos GPUs, which shrunk the eDRAM to also be 65 nm. Some of these motherboards also came with an updated CB bootloader that patched the SMC (or "JTAG") Hack.

Most of these motherboards are known to be reliable, but some may come with leaky 16v 1500 µF Sanyo capacitors.

Part Number: X815842

Images

Xbox 360 Jasper V1 Top.png Xbox 360 Jasper V1 Bottom.png

Schematics

Includes "Panda" integrated memory unit, using an additional NAND + USB interface as opposed to the final Jasper solution combined with main NAND.

Boardviews

Retail

Tonasket

Also known as "Jasper Kronos" or by the GPU name, "Kronos". It was first spotted in late 2009 consoles. It is a minor PCB revision of the Jasper, but all of the GPUs on this board are the Kronos revision with a shrunken 65 nm Stryx eDRAM. All versions of this motherboard are also known to be reliable. NAND flash configurations on the Tonasket are the same as the Jasper, except for the 256 MB config not being used anymore. All of these motherboards are patched against the SMC Hack.

This motherboard is usually referred to as the most reliable revision.

Part Number: X820379

Images

Xbox 360 Jasper v2 (Kronos) Top.png Xbox 360 Jasper v2 (Kronos) Bottom.png

Schematics

Boardviews

Retail

Xbox 360 S

Trinity

Significant motherboard redesign used for the launch models of the Xbox 360 S. It combines the CPU and GPU into one 45 nm die while still using the 65 nm Styx EDRAM. The name of the new combied chip was Vejle, while the codename before the chip was finalized was Valhalla. It has the same flash configs as the Jasper & Tonasket while also being decently reliable. Interestingly, non-retail Trinity consoles came with a "big block" 512 MB NAND instead of 64 MB. Retail 4 GB SKUs with this motherboard came with an internal 4 GB Memory Unit add-on.

Part Number: X820379

Images

Retail (factory-fitted HDD model - note the lack of MUPort connector in area D1, just above the NAND)

Xbox 360 Trinity Top.png Xbox 360 Trinity Bottom.png

Unpopulated

Xbox 360 Trinity Top (Unpopulated).png Xbox 360 Trinity Bottom (Unpopulated).png

Schematics

Boardviews

Debug/XDK Boardview

While this isn't a boardview for Retail systems, it can still be referenced due to the layout being identical. The only major differences are that it's a six layer motherboard and the RAM has extra traces for 1 GB of memory.

Corona

Also known as "Corona V1 (16MB)" or "Corona V2 (4 GB)"

First appeared in mid-2011 S consoles. It has many similarities to Trinity, but slightly simplified with a new south bridge that can support on-board 4 GB NANDs. The new south bridge integrated the ethernet PHY and HANA IC into it. It is also reliable, aside from the 4 GB flash chips.

Part Number: X857330

4 GB Build-up: X859085

Images

Corona 4 GB (note the new NAND on the back, and the tiny BGA interface chip in area D1 where the original NAND would be)

Xbox 360 Corona with POST-OUT Top.pngXbox 360 Corona with POST-OUT Bottom.png

Schematics

Corona PCB

Translation

Boardviews

Retail boardview

Waitsburg

Also known as "Corona V3 (16MB)" or "Corona V4 (4 GB)"

First appeared in early 2012 S consoles. POST trace for the CPU has been removed. 4 GB versions of this board also came with a BGA eMMC intead of the Hynix TSOP NAND + Phison PS700 that was previously on the Corona. It's otherwise exactly the same as the Corona.

Part Number: X862605

Images

Waitsburg 16 MB (note TSOP chip in area D1, with the outline for the BGA eMMC barely visible under it)

JFT-XBOX360S-Waitsburg-Top-20240121.pngJFT-XBOX360S-Waitsburg-Bottom-20240121.png

Schematics

Since the Waitsburg is very similar to the Corona, you can refer to its schematics.

Boardviews

Retail Boardview

Xbox 360 E

Stingray

Also known as "Corona V5 (16MB)" or "Corona V6 (4 GB)"

Launch model Xbox 360 E motherboard. Very similar to Waitsburg but has a single barrel power supply connector and less rear I/O. The ICs for tilt detection and front panel button chimes are also removed, but the pads are still present.

Part Number: X854326

Images

Stingray 4 GB

Xbox 360 Corona Stingray Top.png Xbox 360 Corona Stingray Bottom.png

Schematics

Boardview

Retail boardview

Winchester

Exclamation-circle-fill.svgNo schematics or boardviews are currently available for this motherboard at the time of writing.

Revised XCGPU and a vastly more simplified layout. The new Oban XCGPU integrated the eDRAM into the main die, shrunk the manufacturing process to 32 nm, and patched the "Reset Glitch Hack" by disabling many of the pins used for that exploit. This motherboard first appeared in Xbox 360 Es in late 2014, and is also very reliable.

Part Number: X879957

Images

Winchester 4 GB

Xbox 360 Winchester Top.png Xbox 360 Winchester Bottom.png

Schematic Notes

USB lines

Gameport
Front USB
Memport
Front USB (Memory Unit)
Expport
Rear USB (incl. Kinect)
Waveport
Xbox 360 S/E Wi-Fi card
MUport
Internal USB (Memory Unit for Trinity)
Argon
RF module for original models
Boron
RF module for Xbox 360 S models