Xbox 360:Updating your Kernel/Dashboard/pt

Nunca atualize o seu console usando uma atualização de sistema original. Isso instalará uma NAND padrão e brickará o seu dispositivo!

Este guia te orientará na atualização do seu Kernel/Dashboard para a versão mais recente. Manter o seu Kernel/Dashboard atualizado garante que possa rodar jogos mais novos em seu console e te dá as funcionalidades mais recentes implementadas no dashboard oficial. Seguindo este guia, o Kernel/Dashboard mais recente será corrigido para incluir o Dashlaunch (usando as informações do seu console) e, em seguida, será flasheado para seu console. Esse processo quebrará uma instalação JTAG/RGH existente, mesmo que o hack dependa de uma versão específica do dashboard.

Uma demonstração em vídeo de como atualizar seu dashboard JTAG/RGH dashboard pode ser encontrada no canal do MrMario2011.

Requirements

• A Windows PC
• A JTAG/RGH Xbox 360 - Identification Guide
• A NAND dump (flashdmp.bin, nanddump1.bin, or nanddump2.bin file) and your CPU Key (FUSES.txt or cpukey.txt file) - Guide
• File:Simple 360 NAND Flasher.7z (Optional)
• J-Runner with Extras

Patching the NAND

1. Download and launch J-Runner on your PC.
2. Click Load Source on the middle left of the window and select either a nanddump1.bin, nanddump2.bin, or flashdmp.bin.
3. Verify that everything looks normal in "XeBuild" section on the upper right.
4. Verify that the desired kernel version is selected.
5. Click Create XeBuild in the top of the window. If everything went well, you should end up with fresh NAND file called updflash.bin.

Flashing your Patched NAND

Method 1: XeLL

1. Copy updflash.bin into the root of USB drive and plug it in.
2. Press eject to boot Xell and wait for Xell to flash the NAND with rawflash.
3. If everything went fine you will get a message saying it was successful and you should shutdown the console.
4. Boot your console and verify that everything works. Make sure you are in latest kernel version.

Method 2: Simple 360 NAND Flasher

1. Unzip 360 NAND Flasher to your Xbox 360's internal hard drive or a USB drive.
2. Copy updflash.bin to the directory of 360 Nand Flasher's executible.
3. Run the applicaton in your desired dashboard. (e.g. Aurora, Freestyle, XeXMenu, etc.)
4. Press the A button and then press START. The program will flash the new NAND image and automatically reboot the conole when finished.
5. Verify that everything works. Make sure you are in latest kernel version.

Installing the Avatar Data

If you're using a stealth server, manually installing the avatar data from a USB drive will not be required and can just be downloaded from the internet like a stock console.

1. On your PC, download the latest system update from Xbox.com
   • (mirror)
2. Extract the update and copy $SystemUpdate to your USB storage device.
   • You might need to change $SystemUpdate to $$ystemUpdate to bypass Dashlaunch's update blocker.
3. Plug the storage device into your Xbox. This seems to work best when in original dashboard.
4. If you see THIS, press yes. If you see THIS, DO NOT ACCEPT AS YOU WILL BRICK YOUR CONSOLE.
5. The Xbox 360 will install missing data and then reboot. Verify the installation by going to the original dashboard and checking that your avatar has skin and does not look like ghost anymore.