Search results
Jump to navigation
Jump to search
Page title matches
- ...der's video woes stem from a poor board layout, as the trace which carries composite video from the PPU is very thin and is clumped together with traces from so ...[https://console5.com/store/nes-toploader-nes-101-and-famicom-composite-av-mod-kit.html Cathouse Games PCB].8 KB (1,360 words) - 18:28, 20 October 2023
- 45 bytes (7 words) - 20:31, 25 April 2024
Page text matches
- |composite = Yes, 1x shared with s-video *1 Composite Input (shared with s-video)1 KB (172 words) - 04:48, 1 November 2023
- ...such as the HD Retrovision cables and RetroTINK line of scalers can accept composite video as sync without real issue. ...ing several traces and should only be attempted at one's own risk. In this mod, sync is pulled directly from the [http://pdf.datasheetarchive.com/indexerf3 KB (448 words) - 10:33, 10 July 2023
- By default, the N64 outputs RF via a RF modulator, and composite and S-Video through the AV output port. There are various mods to add RGB o ...route=product/product&product_id=50 Voultar's N64 RGB board]. Performing a mod like this one will allow you to use an NTSC SNES RGB cable that uses CSYNC.2 KB (279 words) - 18:30, 4 September 2023
- * <s> [[ColecoVision:Multi-BIOS Mod]] </s> * <s> [[ColecoVision:5V VRAM Mod]] </s>4 KB (546 words) - 16:07, 14 March 2024
- ...tween the 5V and ground rails. Thankfully, the Famicom can be modified for composite video, S-Video, and even RGB with an NESRGB kit. The NESRGB mod offers both TTL and 75 ohm CSYNC output, toggled via jumper J8. If you plan4 KB (739 words) - 21:28, 4 September 2023
- ...an/composite-video-output-mod-for-magnavox-odyssey Odyssey Composite Video Mod (designed by Ralph Baer)] * [https://www.youtube.com/watch?v=At6H6SIfWTc&t=109s Composite Mod: Boojakascha's Video Board]3 KB (425 words) - 02:35, 6 September 2023
- * <s> [[Odyssey2:Internal "The Voice" Mod]] </s> * <s> [[Odyssey2:Atari Joystick Mod]] </s>3 KB (399 words) - 00:07, 31 January 2024
- ...rom the PS2 motherboard. [http://www.dansprojects.com/ps2sync.html Another mod] can sacrifice all other video mods to make the console output CSYNC. ...your cables. Alternatively, most RGB SCART cables made for the PS2 have a composite video breakout on it, which might be easier for your overall setup.3 KB (524 words) - 19:22, 4 September 2023
- ...ftbehind.wordpress.com/2013/10/18/sega-game-gear-rgb-composite-s-video-out-mod-with-lcd-upgrade/ used the EXT port on the Game Gear to output RGB video] w == VGA+RGB Mod ==3 KB (475 words) - 19:48, 3 July 2022
- |composite = 1x RCA == RGB Mux Mod ==4 KB (624 words) - 04:29, 1 November 2023
- ... <small>(UK Seller, works on ''all'' N64's. Unmodded consoles will work in composite-to-HDMI modes and modded consoles will work in RGB-to-HDMI modes.)</small> ...f not, or if you're unsure, you can try "sync-on-luma" cables, or "sync on composite" with highly shielded cables.'''</small>6 KB (784 words) - 09:23, 12 July 2023
- * [[Intellivision:Power Connector Mod]] * [[Intellivision:Yannick RGB Mod]]4 KB (517 words) - 00:57, 14 February 2024
- * <s> [[SG-1000:TMS RGB Mod]] </s> [https://videogameperfection.com/products/tms-rgb-v2-board/ <sup>(1) * <s> [[SG-1000:RGB Mod]] </s>3 KB (368 words) - 17:19, 25 April 2024
- The NESRGB is a mod designed by Tim Worthington to improve the video quality of the NES and Fam ...) video output, with some only having RF output. The NESRGB is an internal mod that adds RGB and S-video outputs to the NES and Famicom.4 KB (532 words) - 20:22, 11 April 2024
- The Japanese and American consoles output NTSC video in composite and S-Video, using the connector that has been customary since the [[SNES:S The European GC outputs video only in PAL (4.43) composite (SNES/N64 compatible connector) and RGB (different but more because of lack1 KB (234 words) - 10:20, 5 June 2022
- The ultimate switchless mod for LCD modded Nomads! Based on the Sebastian Kienzl’s code. * '''Switchless mod''' – change region / video modes via the Mode button.6 KB (991 words) - 03:21, 25 September 2023
- {{Warning|This is an extremely difficult and destructive mod. Be warned, once you start this process, there's no going back, as you'll b This page describes a mod to the [[RetroRGB_Migration:Innovation GBA TV Converter]] by directly solde2 KB (352 words) - 04:20, 5 July 2022
- ...to the "sync" line. In the context of RGB SCART with video game consoles, Composite Video (cvbs) and Luma (from S-Video) both can be safely used as sync. Some | '''RGBS (Composite Sync)'''3 KB (481 words) - 19:55, 28 June 2022
- * <s> [[NES:Region-Free Mod (CIC, cart adapter)]] </s> * [[NES: PlayChoice-10 PPU Mod|(RGB) PlayChoice-10 PPU Mod]]6 KB (752 words) - 22:07, 12 April 2024
- ...vided here. It's recommended to install a pre-made [[Genesis:Triple Bypass Mod]] instead.}} ...sis internal RGB amp with a different one. All details are below, but this mod requires you to make irreversible modifications to your Genesis system.5 KB (880 words) - 16:47, 9 July 2023
- This method effectively disconnects color output on composite video, which removes a source of interference in the RGB signals. To do thi ...ood option if you want cleaner RGB but still want to preserve color on the composite output.3 KB (425 words) - 21:52, 11 March 2024
- |composite = 1 (See text) ...Tercontrol system, standalone CCTV display using a Belling-Lee socket for composite video (also an MT10 with tacked on external power supply)2 KB (300 words) - 04:29, 1 November 2023
- ...udio and composite or S-video output from your Game Boy Advance. While the mod is meant to be plug and play via a ribbon cable once you open the console, If you'd like to see how this mod compares to the other GBA - TV options, please check out [[gbacompare|the c2 KB (340 words) - 04:19, 5 July 2022
- * This mod permanently alters your device. * This mod should not be done by a beginner and is considered intermediate/advanced.3 KB (543 words) - 04:04, 19 November 2023
- ...n't compatible with all programs and only works properly in 5.x although a mod for 6.39 exists. *Composite (RCA): PSP-S1502 KB (275 words) - 09:14, 30 December 2023
- Fortunately, the SMS II is capable of being easily modified for composite, S-video or RGB outputs. ...d; if not, only some slight circuit changes will be needed to get a proper composite video signal.4 KB (753 words) - 23:32, 4 May 2024
- * [[Game Gear:Controller Port Mod]] ...ftbehind.wordpress.com/2013/10/18/sega-game-gear-rgb-composite-s-video-out-mod-with-lcd-upgrade/ 1]4 KB (507 words) - 04:58, 14 February 2024
- * This mod permanently alters your device. * This mod should not be done by a beginner and is considered intermediate/advanced.3 KB (565 words) - 23:17, 19 November 2023
- ...ake ''sure'' your N64 can be modded for RGB]] and that this is the correct mod for your system. If your system is an NTSC N64 with the proper VDC-NUS chip ...pre-made board, click here: [[N64:RGB_Mod_Basic_Amp_Install|N64 Basic RGB Mod - Pre-Made Amp]]5 KB (950 words) - 06:59, 2 September 2023
- ...The coaxial cable can then output to an RF-capable television, or an RF-to-composite demodulation solution, such as a VCR. ...pensive than arguably superior solutions, such as a good-quality composite mod.9 KB (1,499 words) - 09:58, 12 May 2022
- ...later followed by the Wii Mini which was a budget model that only offered composite output and lacks 480p output. This page also covers vWii for the Wii U. * <s> [[Wii:Digital Audio (SPDIF) Mod]] </s>5 KB (674 words) - 05:06, 15 April 2024
- ...ondermega models have it available in stock form. Every model also outputs composite video, which would have been the default choice alongside RF during their h ...to filter out DC offset), and these must be added to the cable itself. The composite video signal can be used for sync, and requires no extra components since i6 KB (1,008 words) - 07:52, 3 April 2024
- * <s> [[NDS:USB-C Power Mod]] </s> * <s> [[NDS:Controller Port Mod]] </s>4 KB (561 words) - 19:38, 23 March 2024
- ...n 18 on the S-RGB chip to pin 3 on the multi-out or by installing a bypass mod. ...quipment! Instead, you can use a cable that gets sync from luma (pin 7) or composite video (pin 9) on the multi-out connector (luma recommended).3 KB (446 words) - 05:03, 8 March 2024
- |composite = Yes This monitor supports 480i/240p and 576i/288p only. Two composite inputs and one s-video input are provided at the back, without an option fo3 KB (504 words) - 04:28, 1 November 2023
- {{warning|'''WARNING:''' ''Before'' starting this mod, [[N64:RGB-Compatible_Systems|make ''sure'' your N64 can be modded for a ba This guide shows RGB mod instructions using a pre-made RGB amp. There are a few different ones avail7 KB (1,233 words) - 06:59, 2 September 2023
- ...olutions for a long time, but more recently such projects as the Xbox HDMI mod and the Chimeric Systems Xbox HDMI converter pass the Xbox's native Dolby D1 KB (238 words) - 13:59, 27 January 2023
- * <s> [[SCV:Composite Video Mod]] </s>2 KB (296 words) - 00:08, 31 January 2024
- |composite = 1x front / 2x rear [https://shmups.system11.org/viewtopic.php?t=63622 An RGB mod for the BA-5D chassis the FV310 are built on can be found here].2 KB (225 words) - 04:21, 1 November 2023
- |composite = 1x front / 2x rear [https://shmups.system11.org/viewtopic.php?t=63622 An RGB mod for the BA-5D chassis the FV310 are built on can be found here].2 KB (226 words) - 06:14, 15 November 2023
- ...s should be considered an expert-only mod and will (in most cases) disable composite video output.}} The "Triple Bypass" mod is a board that bypasses the audio circuit, video circuit, and optionally,5 KB (789 words) - 07:14, 30 April 2024
- ...s should be considered an expert-only mod and will (in most cases) disable composite video output.}} The "Triple Bypass" mod is a board that bypasses the audio circuit, video circuit, and optionally,5 KB (813 words) - 07:14, 30 April 2024
- ...chip are connected to the input pins to encode the signals for S-video and composite video. It is possible to use the color difference output pins of the S-ENC This mod can only be performed on consoles containing the BA6592F or S-ENC encoder c5 KB (872 words) - 16:16, 14 March 2024
- Modern TV's may not have component/composite inputs and/or you may prefer to connect your Xbox via HDMI. The only fully digital HDMI mod is not mentioned here due to legal threats regarding their device.2 KB (396 words) - 02:07, 13 February 2024
- ...tor not being in place on R19, makes the video encoder output PAL over RF, Composite and S-Video. In addition to that, the clock crystal Y1 was changed from a 1 ...y want to keep the resistor attached on one pad so you can always undo the mod.2 KB (276 words) - 13:24, 17 February 2024
- The [https://www.kadenken.com/view/item/000000001707 RGB2C02N] is a mod that replaces the PPU and offers RGB output as well as a changing the clock Note that this mod does not support YPbPr, s-video, or composite and only supports NTSC output.3 KB (576 words) - 21:27, 12 April 2024
- !RF mod. [[File:SNES PAL composite cable.webp|thumb|right|The PAL composite cable is different from the NTSC one]]8 KB (1,181 words) - 19:17, 23 April 2023
- ...igher are of later motherboard revisions. NUS-CPU-04 revisions do not have composite sync (CSYNC) present on pin 3 of the multiout as the components for it were ...t in the user experiencing significant difficulties when attempting to RGB mod them. While it is still possible, it becomes a lot harder. Furthermore, the4 KB (682 words) - 05:07, 8 December 2022
- ...nal SNES/SFC consoles. They will ''not'' work with the SNES Mini without a mod though. ...hat get sync from the luma pin, or fully shielded that get sync from cvbs (composite video).4 KB (511 words) - 21:33, 24 September 2023
- ...odification for RGB-output. It only needs a cable. The SMS2 does require a mod, but a "bypass" isn't required, you just need to connect pins and add an ou ...ions to your system. Beginner and intermediate modders should not try this mod!6 KB (1,072 words) - 16:05, 21 November 2023