Search results
Jump to navigation
Jump to search
Page title matches
- ...der's video woes stem from a poor board layout, as the trace which carries composite video from the PPU is very thin and is clumped together with traces from so ...[https://console5.com/store/nes-toploader-nes-101-and-famicom-composite-av-mod-kit.html Cathouse Games PCB].8 KB (1,360 words) - 18:28, 20 October 2023
- 45 bytes (7 words) - 20:31, 25 April 2024
Page text matches
- |composite = Yes, 1x shared with s-video *1 Composite Input (shared with s-video)1 KB (172 words) - 04:48, 1 November 2023
- ...such as the HD Retrovision cables and RetroTINK line of scalers can accept composite video as sync without real issue. ...ing several traces and should only be attempted at one's own risk. In this mod, sync is pulled directly from the [http://pdf.datasheetarchive.com/indexerf3 KB (448 words) - 10:33, 10 July 2023
- By default, the N64 outputs RF via a RF modulator, and composite and S-Video through the AV output port. There are various mods to add RGB o ...route=product/product&product_id=50 Voultar's N64 RGB board]. Performing a mod like this one will allow you to use an NTSC SNES RGB cable that uses CSYNC.2 KB (279 words) - 18:30, 4 September 2023
- * <s> [[ColecoVision:Multi-BIOS Mod]] </s> * <s> [[ColecoVision:5V VRAM Mod]] </s>4 KB (546 words) - 16:07, 14 March 2024
- ...tween the 5V and ground rails. Thankfully, the Famicom can be modified for composite video, S-Video, and even RGB with an NESRGB kit. The NESRGB mod offers both TTL and 75 ohm CSYNC output, toggled via jumper J8. If you plan4 KB (739 words) - 21:28, 4 September 2023
- ...an/composite-video-output-mod-for-magnavox-odyssey Odyssey Composite Video Mod (designed by Ralph Baer)] * [https://www.youtube.com/watch?v=At6H6SIfWTc&t=109s Composite Mod: Boojakascha's Video Board]3 KB (425 words) - 02:35, 6 September 2023
- * <s> [[Odyssey2:Internal "The Voice" Mod]] </s> * <s> [[Odyssey2:Atari Joystick Mod]] </s>3 KB (399 words) - 00:07, 31 January 2024
- ...rom the PS2 motherboard. [http://www.dansprojects.com/ps2sync.html Another mod] can sacrifice all other video mods to make the console output CSYNC. ...your cables. Alternatively, most RGB SCART cables made for the PS2 have a composite video breakout on it, which might be easier for your overall setup.3 KB (524 words) - 19:22, 4 September 2023
- ...ftbehind.wordpress.com/2013/10/18/sega-game-gear-rgb-composite-s-video-out-mod-with-lcd-upgrade/ used the EXT port on the Game Gear to output RGB video] w == VGA+RGB Mod ==3 KB (475 words) - 19:48, 3 July 2022
- |composite = 1x RCA == RGB Mux Mod ==4 KB (624 words) - 04:29, 1 November 2023
- ... <small>(UK Seller, works on ''all'' N64's. Unmodded consoles will work in composite-to-HDMI modes and modded consoles will work in RGB-to-HDMI modes.)</small> ...f not, or if you're unsure, you can try "sync-on-luma" cables, or "sync on composite" with highly shielded cables.'''</small>6 KB (784 words) - 09:23, 12 July 2023
- * [[Intellivision:Power Connector Mod]] * [[Intellivision:Yannick RGB Mod]]4 KB (517 words) - 00:57, 14 February 2024
- * <s> [[SG-1000:TMS RGB Mod]] </s> [https://videogameperfection.com/products/tms-rgb-v2-board/ <sup>(1) * <s> [[SG-1000:RGB Mod]] </s>3 KB (368 words) - 17:19, 25 April 2024
- The NESRGB is a mod designed by Tim Worthington to improve the video quality of the NES and Fam ...) video output, with some only having RF output. The NESRGB is an internal mod that adds RGB and S-video outputs to the NES and Famicom.4 KB (532 words) - 20:22, 11 April 2024
- The Japanese and American consoles output NTSC video in composite and S-Video, using the connector that has been customary since the [[SNES:S The European GC outputs video only in PAL (4.43) composite (SNES/N64 compatible connector) and RGB (different but more because of lack1 KB (234 words) - 10:20, 5 June 2022
- The ultimate switchless mod for LCD modded Nomads! Based on the Sebastian Kienzl’s code. * '''Switchless mod''' – change region / video modes via the Mode button.6 KB (991 words) - 03:21, 25 September 2023
- {{Warning|This is an extremely difficult and destructive mod. Be warned, once you start this process, there's no going back, as you'll b This page describes a mod to the [[RetroRGB_Migration:Innovation GBA TV Converter]] by directly solde2 KB (352 words) - 04:20, 5 July 2022
- ...to the "sync" line. In the context of RGB SCART with video game consoles, Composite Video (cvbs) and Luma (from S-Video) both can be safely used as sync. Some | '''RGBS (Composite Sync)'''3 KB (481 words) - 19:55, 28 June 2022
- * <s> [[NES:Region-Free Mod (CIC, cart adapter)]] </s> * [[NES: PlayChoice-10 PPU Mod|(RGB) PlayChoice-10 PPU Mod]]6 KB (752 words) - 22:07, 12 April 2024
- ...vided here. It's recommended to install a pre-made [[Genesis:Triple Bypass Mod]] instead.}} ...sis internal RGB amp with a different one. All details are below, but this mod requires you to make irreversible modifications to your Genesis system.5 KB (880 words) - 16:47, 9 July 2023
- This method effectively disconnects color output on composite video, which removes a source of interference in the RGB signals. To do thi ...ood option if you want cleaner RGB but still want to preserve color on the composite output.3 KB (425 words) - 21:52, 11 March 2024
- |composite = 1 (See text) ...Tercontrol system, standalone CCTV display using a Belling-Lee socket for composite video (also an MT10 with tacked on external power supply)2 KB (300 words) - 04:29, 1 November 2023
- ...udio and composite or S-video output from your Game Boy Advance. While the mod is meant to be plug and play via a ribbon cable once you open the console, If you'd like to see how this mod compares to the other GBA - TV options, please check out [[gbacompare|the c2 KB (340 words) - 04:19, 5 July 2022
- * This mod permanently alters your device. * This mod should not be done by a beginner and is considered intermediate/advanced.3 KB (543 words) - 04:04, 19 November 2023
- ...n't compatible with all programs and only works properly in 5.x although a mod for 6.39 exists. *Composite (RCA): PSP-S1502 KB (275 words) - 09:14, 30 December 2023
- Fortunately, the SMS II is capable of being easily modified for composite, S-video or RGB outputs. ...d; if not, only some slight circuit changes will be needed to get a proper composite video signal.4 KB (753 words) - 23:32, 4 May 2024
- * [[Game Gear:Controller Port Mod]] ...ftbehind.wordpress.com/2013/10/18/sega-game-gear-rgb-composite-s-video-out-mod-with-lcd-upgrade/ 1]4 KB (507 words) - 04:58, 14 February 2024
- * This mod permanently alters your device. * This mod should not be done by a beginner and is considered intermediate/advanced.3 KB (565 words) - 23:17, 19 November 2023
- ...ake ''sure'' your N64 can be modded for RGB]] and that this is the correct mod for your system. If your system is an NTSC N64 with the proper VDC-NUS chip ...pre-made board, click here: [[N64:RGB_Mod_Basic_Amp_Install|N64 Basic RGB Mod - Pre-Made Amp]]5 KB (950 words) - 06:59, 2 September 2023
- ...The coaxial cable can then output to an RF-capable television, or an RF-to-composite demodulation solution, such as a VCR. ...pensive than arguably superior solutions, such as a good-quality composite mod.9 KB (1,499 words) - 09:58, 12 May 2022
- ...later followed by the Wii Mini which was a budget model that only offered composite output and lacks 480p output. This page also covers vWii for the Wii U. * <s> [[Wii:Digital Audio (SPDIF) Mod]] </s>5 KB (674 words) - 05:06, 15 April 2024
- ...ondermega models have it available in stock form. Every model also outputs composite video, which would have been the default choice alongside RF during their h ...to filter out DC offset), and these must be added to the cable itself. The composite video signal can be used for sync, and requires no extra components since i6 KB (1,008 words) - 07:52, 3 April 2024
- * <s> [[NDS:USB-C Power Mod]] </s> * <s> [[NDS:Controller Port Mod]] </s>4 KB (561 words) - 19:38, 23 March 2024
- ...n 18 on the S-RGB chip to pin 3 on the multi-out or by installing a bypass mod. ...quipment! Instead, you can use a cable that gets sync from luma (pin 7) or composite video (pin 9) on the multi-out connector (luma recommended).3 KB (446 words) - 05:03, 8 March 2024
- |composite = Yes This monitor supports 480i/240p and 576i/288p only. Two composite inputs and one s-video input are provided at the back, without an option fo3 KB (504 words) - 04:28, 1 November 2023
- {{warning|'''WARNING:''' ''Before'' starting this mod, [[N64:RGB-Compatible_Systems|make ''sure'' your N64 can be modded for a ba This guide shows RGB mod instructions using a pre-made RGB amp. There are a few different ones avail7 KB (1,233 words) - 06:59, 2 September 2023
- ...olutions for a long time, but more recently such projects as the Xbox HDMI mod and the Chimeric Systems Xbox HDMI converter pass the Xbox's native Dolby D1 KB (238 words) - 13:59, 27 January 2023
- * <s> [[SCV:Composite Video Mod]] </s>2 KB (296 words) - 00:08, 31 January 2024
- |composite = 1x front / 2x rear [https://shmups.system11.org/viewtopic.php?t=63622 An RGB mod for the BA-5D chassis the FV310 are built on can be found here].2 KB (225 words) - 04:21, 1 November 2023
- |composite = 1x front / 2x rear [https://shmups.system11.org/viewtopic.php?t=63622 An RGB mod for the BA-5D chassis the FV310 are built on can be found here].2 KB (226 words) - 06:14, 15 November 2023
- ...s should be considered an expert-only mod and will (in most cases) disable composite video output.}} The "Triple Bypass" mod is a board that bypasses the audio circuit, video circuit, and optionally,5 KB (789 words) - 07:14, 30 April 2024
- ...s should be considered an expert-only mod and will (in most cases) disable composite video output.}} The "Triple Bypass" mod is a board that bypasses the audio circuit, video circuit, and optionally,5 KB (813 words) - 07:14, 30 April 2024
- ...chip are connected to the input pins to encode the signals for S-video and composite video. It is possible to use the color difference output pins of the S-ENC This mod can only be performed on consoles containing the BA6592F or S-ENC encoder c5 KB (872 words) - 16:16, 14 March 2024
- Modern TV's may not have component/composite inputs and/or you may prefer to connect your Xbox via HDMI. The only fully digital HDMI mod is not mentioned here due to legal threats regarding their device.2 KB (396 words) - 02:07, 13 February 2024
- ...tor not being in place on R19, makes the video encoder output PAL over RF, Composite and S-Video. In addition to that, the clock crystal Y1 was changed from a 1 ...y want to keep the resistor attached on one pad so you can always undo the mod.2 KB (276 words) - 13:24, 17 February 2024
- The [https://www.kadenken.com/view/item/000000001707 RGB2C02N] is a mod that replaces the PPU and offers RGB output as well as a changing the clock Note that this mod does not support YPbPr, s-video, or composite and only supports NTSC output.3 KB (576 words) - 21:27, 12 April 2024
- !RF mod. [[File:SNES PAL composite cable.webp|thumb|right|The PAL composite cable is different from the NTSC one]]8 KB (1,181 words) - 19:17, 23 April 2023
- ...igher are of later motherboard revisions. NUS-CPU-04 revisions do not have composite sync (CSYNC) present on pin 3 of the multiout as the components for it were ...t in the user experiencing significant difficulties when attempting to RGB mod them. While it is still possible, it becomes a lot harder. Furthermore, the4 KB (682 words) - 05:07, 8 December 2022
- ...nal SNES/SFC consoles. They will ''not'' work with the SNES Mini without a mod though. ...hat get sync from the luma pin, or fully shielded that get sync from cvbs (composite video).4 KB (511 words) - 21:33, 24 September 2023
- ...odification for RGB-output. It only needs a cable. The SMS2 does require a mod, but a "bypass" isn't required, you just need to connect pins and add an ou ...ions to your system. Beginner and intermediate modders should not try this mod!6 KB (1,072 words) - 16:05, 21 November 2023
- ...system, but official Microsoft cables are hard to find and expensive. This mod is a great way to make the original Xbox a more modern console that is more ...to advanced AV mode. If you would like to continue to use the AV port for composite, you will want to connect those two pairs of solder points through external6 KB (1,034 words) - 03:59, 6 May 2023
- {{Warning|This mod will disable composite video!}} {{Note|This mod may not be needed at all on other revision AES consoles. Technically, this5 KB (726 words) - 04:31, 25 April 2023
- ...displayed instead of the OSD menu. The switch allows you to "turn off" the mod, so that the OSD menu can still be used. ...PIP image fills the entire screen. The switch allows you to "turn off" the mod, so that the PIP feature can still be used if you wanted.9 KB (1,373 words) - 10:35, 11 September 2023
- ...re looking for installation guides, please see the [[Genesis:Triple Bypass Mod]] page. ...u can't use composite video cables, but you can use anything that syncs on composite video (including HD Retrovision cables).9 KB (1,507 words) - 01:45, 3 April 2023
- ...o restore these connections with modification. Further information on this mod and instructions can be found [[Genesis:Restoring_CD_Audio_(Model_3)|here]] ...mpatibility can be restored on the VA2. You can find instructions for this mod [[Genesis:Restoring_CD_Audio_(Model_3)|here]]. In addition, the VA2 receive5 KB (716 words) - 02:07, 19 March 2024
- ...DFO you will need to remove the old video mod first or you will get broken composite in NTSC mode. ...video outputs on separate connectors. The system can be [[PS1:CSYNC Output Mod|modded to output CSYNC]] if required for devices such as Extron Crosspoints10 KB (1,629 words) - 15:08, 27 February 2024
- ...lor-palettes-mod-kit?variant=40376767774892 "OneChip" IPS ‘TV Version’] || Composite through Link Port || IPS || Same ...ersion-av-out-consolizer-mod?variant=39625618260140 "OneChip" 9380 IPS] || Composite through Link Port || IPS || Larger12 KB (2,007 words) - 04:44, 23 July 2023
- ...ideo modifications for the Intellivision in existence only involved adding composite video or S-video. In 2015, Fred Kono (going by the username juice2839 on At ...s. Regardless, both of these mods are based on the same principles as this mod and even tap video from the same points.5 KB (921 words) - 17:30, 24 September 2023
- ...he switches are favored by retro gamers for their multi-signal capability (composite, component, svideo, RGB) and their density. #Does the switch require CSYNC or can it accept composite video and luma as sync? All CrossPoints require CSYNC unless sync is split6 KB (957 words) - 17:31, 13 March 2024
- ...0p. If you've gone through the trouble of installing this adapter, the RGB mod is worth doing. Before you start this guide, make sure your Game Boy Advan ...e:Innovation GBA RGB Guide Step2-1.png]] <br> The sync `S` is actually the composite video out. There seems to be a Sony CXA chip (or clone) in this unit. You c3 KB (596 words) - 04:19, 5 July 2022
- * Outputs composite video, S-video, RGB and stereo audio from a custom 12-pin multiout connecto ...) which can resolve this problem. This issue is also less apparent through composite video and S-video. '''If you want to be able to play ''every'' game without10 KB (1,517 words) - 22:23, 10 May 2024
- ...Tianfeng and inspired by his previous work on the [[Genesis:Triple Bypass Mod]] and [https://www.retrorgb.com/omega-mvs-review.html Omega MVS replacement ...s properly shaped to match a Genesis 2's and sync is available on both the composite video (as 75ohm CSYNC) and CSYNC (as TTL like the Genesis 2) pins. This all7 KB (1,119 words) - 01:55, 23 July 2023
- ...or your gaming experience. Unfortunately information on installing the 3BP mod on the various revisions is scattered. This document will serve as a clear * This mod permanently alters your device.11 KB (1,961 words) - 00:25, 1 December 2022
- ...ons, power LED, and two 7-pin controller ports. On the right-hand side are composite video and mono audio outputs, a rarity on game consoles of the time. At the ...he rear carrying RGB output. However, this is not real RGB and is actually composite video decoded into RGB for compatibility with French TVs.20 KB (3,239 words) - 18:11, 16 February 2024
- ...ched. Another issue is that the FM Sound Unit does not pass through RGB so composite video is the only video output option for a stock setup. It is possible to ...apparent with the [https://www.smspower.org/Hacks/SonicTheHedgehog-SMS-FM-Mod FM audio hack of ''Sonic the Hedgehog''] which uses the YM2413 for music an10 KB (1,681 words) - 07:12, 27 March 2024
- ...a microSD card and a 9-pin mini-DIN connector is present for both RGB and composite video output. This connector uses the same pinout as the model 2 [[Genesis: * PC Engine LT (no CD audio, this requires an additional mod detailed [https://www.youtube.com/watch?v=zkwmFwWC298 here])6 KB (974 words) - 10:00, 16 July 2023
- ...n the underside of the motherboard]]. Video quality is also compromised as composite video is afflicted with "rainbow banding" and the RGB output has noticeable ...ile is also the basis for the audio portion of the [[Genesis:Triple Bypass Mod|Triple Bypass]] modification board.27 KB (4,601 words) - 05:55, 5 May 2024
- ...as well as show examples of each. There is also the [[NES:Height Defnes]] mod which allows for no-cut installation of a Hi-Def NES into a top loader. ...ansion audio on your flash cart, just turn on the option in the Hi-Def NES mod.11 KB (1,765 words) - 20:38, 21 January 2024
- modern HDTVs. Multiple input options: component, SCART RGB, composite and S-video are # Only use SCART cables that provide sync using 75 ohm terminated luma or composite video or buffered/attenuated CSYNC. Use of unbuffered TTL CSYNC is expressl17 KB (2,797 words) - 02:51, 25 May 2022
- * Outputs composite video, RGB and mono audio from a full-size 8-pin DIN connector ...1601-09) only output RGB and require a special cable as they do not output composite video (used for sync on most RGB cables)50 KB (8,412 words) - 18:35, 20 April 2024
- {{Warning | This is an advanced mod. If care is not taken while removing the original memory chip, multiple sol The principles behind the FRAM mod remain the same for all PC Engine/TurboGrafx-16 systems which have memory b26 KB (4,753 words) - 19:02, 14 February 2024
- ...tari 2600) <ref>https://forums.atariage.com/topic/199461-atari-2600-stereo-mod/</ref> ...n however. <ref>https://forums.atariage.com/topic/351323-atari-2600-stereo-mod-actually-making-a-significant-difference-to-audio-content-or-not//</ref>75 KB (11,011 words) - 03:06, 29 February 2024
- ...many games used in tandem with the blurring effect of a video cable (like Composite) and a CRT. The idea is that the video cable and display blend the dither p ...Composite video or RF (with one rare exception). You will need at least a composite signal to connect directly to the RT4K. Use the list below to tell which on47 KB (7,499 words) - 13:12, 9 May 2024
- *All models feature an A/V video output. This port supports composite, component, and VGA video outputs in addition to RCA and optical audio outp ...DG-16D4S with a Winbond flash. These drives require the infamous Kamikaze mod in order to enable read/write access.27 KB (4,518 words) - 07:42, 1 May 2024
- ====Composite==== | [[File:Composite Video with Audio.png|200px|Composite Video with Audio RCA Connectors]]159 KB (24,348 words) - 14:26, 23 March 2024
- ...6i for PAL region titles), regardless of whether you're using the included composite cables or the 480p-enabling component cables. However, there are two games ...s only at 240p and cannot be played at any other resolution unless using a mod like Swiss to force alternate display modes, which may or may not cause gam37 KB (4,831 words) - 21:58, 12 January 2022
- ** HD15/VGA: RGBHV, RGBS, RGsB, YPbPr, S-video and Composite ** SCART: RGBS, RGsB, YPbPr, S-video and Composite172 KB (27,568 words) - 23:21, 7 May 2024